Capacitive Touch POE Network Funtion 7 Inch Android Tablet PC Wall
The Q896S is a capacitive touch panel with android system, two
speakers, microphone, power over ethernet, support SIP stack for
intercom in smart home and hospital.
Features For IP Intercom:
- IPS Screen (G+G glass)
- 2 X Speakers, 1 X Microphone, Supports SIP Stack
- 2 X RS232, 1 X RS485, GPIO, Temperature & Humidity Sensor
- Auto web application (one webpage can be showed only on the screen)
- Android OS
- Inwall / Onwall version
- HDMI, Serial port , GPIO , Uart interface
- No buttons design
- Slim Body with 3 Brackets for wall mounting
- Camera & Mic
- Support ROOT permissions for private application
- No battery deisgn
- Auto power on
- 12V DC / 24V DC available for power
- POE feature (IEEE 802.3 af)
- NFC reader
- RED, GREEN, BLUE LED light on the top
|Hardware Specs||Solution||Allwinner’s A83T processor|
|CPU||Octa-core Cortex tm-7a CPU A83T 1.2Ghz|
|Display||7 Inch IPS Display, Resolution:1024 x 600, Brightness: 350 cd/m2|
|Software Feature||System||Google Android 6.0.1|
|Audio||Two Speakers 2 X 1 Watt (Integrated 3W Amplifier)|
|USB 2.0 port USD HOST Mode Default, Optional: Jumper Cap for Device
|DC IN Power Terminal (9V-36V)|
|Optional:RS232,RS485,1xGPIO IN, 1xGPIO OUT|
|Network||WIFI+BLUETOOTH||WIFI (802.11b/g/n), Bluetooth 4.0 support BLE|
|LAN Port||Ethernet RJ45|
|Power Supply||DC IN or PoE||DC 9V - 36V or PoE|
|Boot Up||Auto Boot||Auto Boot Up When Power Supplies|
Q896S Interfaces on the back:
- HDMI OUT
- DC IN (9-36V)
- RJ45 (POE IEEE802.3 af)
- Optional: 2 X RS232, 1 X RS485, 1 X GPIO INPUT, 1 X GPIO Output
- SLOTS FOR MOUNTING
- SCREWS FOR MOUNTING
- Glass wall
Power over Ethernet or PoE technology describes a system to safely transfer electrical power,
along with data, to remote devices over standard category 5 cable
in an Ethernet network. It does not require modification of
existing Ethernet cabling infrastructure.
The IEEE 802.3af PoE standard provides up to 15.4 W of DC power
(minimum 44 VDC and 350 mA) to each device. Only 12.95 W is assured
to be available at the powered device as some power is dissipated
in the cable.
Long distance transmission is available for our max power need
about 7w, safe and easy to be used with other POE switch or POE
injector ( IEEE 802.3af PoE standard)
|What is PD and PSE?|
|Power Over Ethernet, IEEE802.3af, is constructed by Power Sourcing
Equipment (PSE) and Power Device (PD). Our Android Tablet works as
a PD and which could powered by some PSE (POE injetor / POE switch)|
|Input||POE 802.3 AF(15.4W)||Home automation / Safety & protection|
|POE 802.3 AT(30W)|
|PoE significantly reduces the need for electricians to install
conduit, electrical wiring, and outlets throughout the enterprise.
With PoE only one cable – a simple CAT-5 Ethernet – is required.
Estimates of cost savings using PoE range from $500 to $1,000 per
port. In larger settings, this represents a major cost reduction.|
A PoE appliance or device can be located anywhere without the need
for AC outlets. For example, wireless LAN access points can be
located – and relocated – on or near ceilings, to fine tune optimum
RF reception. For example, customers often find that access points
are more effective on the ceiling, out of reach from an AC outlet.
|Because PoE networks have fewer wires, there is less likelihood of
an inadvertent power disruption (accidental shut off, etc). With an
Uninterrupted Power Supply (UPS) power to the devices is assured
during a power failure.|
|Using SNMP, network administrators can monitor and control powered
devices, including resetting or shut-off. This allows increased
security, as devices can be powered down when not in use, or if
there is unauthorized access.|
Power mains are eliminated. Since only 48v DC is used, PoE conforms
to Underwriter's Laboratories (UL) Safety Extra Low Volt
SIBO Q896 Android Tablet PC RJ45 PO
- 16 Years Experiences in Tablet PC for Automation
- Competitive Price Directly From Manufacturer( Our Own Factory)
- Excellent Support for Software and Hardware Modification
- Services for Customized Logo and package
- Quick Response for after-sale Services
- On-time Delivery
- 1 Year quality Guarantee
Questions: What is the minimum order quantity ( MOQ ) ?
Answer: No quantity limited, sample order is acceptable.
Questions: What does your customization mean?
Answer: We can customize software for you , boot animation, mounting bracket,
shell, color and so on. Including all the changes you want
Questions : How many days can be shipped ?
Answer: 3-7days for sample orders, 10-25 days for bulk orders.
Questions: How will you deliver my goods to me ?
Answer: We ship by air and sea generally. Including DHL, UPS, FEDEX, TNT and SF.
Questions: How is your product quality ?
Answer: Our raw materials are purchased from qualified suppliers.
Assembled by ourselves. And we have a strong quality control team
to guarantee the quality of our products.
Questions: How long is your warranty ?
Answer: Our warranty is 1 year after delivery. SIBO pay a lot
attention to after-sales service. it's our pleasure to service of
Questions: What we can do ?
ODM/OEM is warmly weclome!
Trial order is acceptable !
Your inquiry is very weclomed. pls feel free contact us if you have
any interets for our products.